Sunday, February 23, 2014

Introducing the Coherent Extruder: A 4 Color, 2 Motor Cold End

›
I have been closely watching the development of multiple nozzles and I've been especially excited by to the release of the Kraken by e3d...
3 comments:
Sunday, February 16, 2014

The Kraken Unboxing!

›
I am super excited because I just received my Kraken in the mail. It came in a small box that was very efficiently packed.  The gummy bears ...
Saturday, February 8, 2014

Formatting SD Card for Marlin / RAMBO

›
I have been happily printing from my SD card for a while but after pulling out the card too early one time, I had to reformat the card to ge...
Tuesday, January 7, 2014

Safety First- Remotely Monitoring and Killing Your Jobs on the Cheap

›
I am always nervous about leaving my printer printing when I leave the house because I have these visions about it suddenly bursting into fl...

Experimenting with Taulman 618 Nylon

›
Most of my experience on this Mendel Max has been with PLA. I have calibrated things well enough that I can pretty much press print, walk a...
Monday, December 30, 2013

Getting the Smart LCD Screen working with Rambo and Marlin

›
I have been running into issues where I couldn't get my Rambo electronics to work with my Smart LCD screen in Marlin. It worked fine whe...
5 comments:
Monday, September 30, 2013

LCD Panel Mount for Mendel Max 2

›
I wanted to install an LCD screen on my 3d printer so that I could run it from SD cards without a computer constantly needing to be plugged ...